PREPARATION
Be sure to remove the filters from the plastic bags before using the unit.
1
Filter Removal
1
Place the unit facing up and
remove the Front Panel.
Lift both sides of the bottom of the Front
Panel to remove the Front Panel.
3
Remove Active Carbon Filter
(black) and True HEPA Filter
(blue) from the plastic bags.
E-10
Be sure to remove the power plug from the wall outlet.
FILTER INSTALLATION
2
Remove the Filter Support.
Pinch the two tabs and lift to remove.
Tabs
Front Panel
Filter Support
Tabs (2 places)
Active Carbon Filter
True HEPA Filter
To Next Page
Loading...
