Sharp PN-B501 - Menu Items; Displaying the Menu Screen

22
E
Menu Items
Displaying the menu screen
Video adjustment and settings of various functions are
enabled. This section describes how to use the menu items.
See page 23 for details of each menu items.
Caution
• Do not turn the main power switch off while the menu items
are being displayed. Doing so may initialize the settings.
TIPS
• Also check the time setting, network settings, and other
settings in the Software Guide.
n
Example of operation
(Adjusting CONTRAST in the PICTURE menu)
1. Press the MENU button to display the menu screen.
1 920x1080
V: 60 Hz H: 67.5 kHz
SCREEN
PICTURE
SETUP
MONITOR
MULTI/PIP
OTHERS
AUTO
CLOCK
PHASE
H-POS
V-POS
H-SIZE
V-SIZE
RESOLUTION SETTING
INPUT SIGNAL
RESET
600
25
610
37
50
50
SCREEN D-SUB[RGB]
OK:[ENTER] END:[RETURN]
2. Press the or button to select PICTURE, and press
the ENTER button.
3. Press the
or button to select CONTRAST.
BRIGHT
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
COLOR ADJUSTMENT
ADVANCED
RESET
31
30
30
30
30
12
SCREEN
PICTURE
SETUP
MONITOR
MULTI/PIP
OTHERS
PICTURE
BACK:[RETURN]
1 920x1080
V: 60 Hz H: 67.5 kHz
D-SUB[RGB]
4. Press the or button to adjust the setting.
BRIGHT
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
COLOR ADJUSTMENT
ADVANCED
RESET
31
40
30
30
30
12
SCREEN
PICTURE
SETUP
MONITOR
MULTI/PIP
OTHERS
PICTURE
BACK:[RETURN]
1 920x1080
V: 60 Hz H: 67.5 kHz
D-SUB[RGB]
For items that have
, press the ENTER button to display
the sub menu.
5. Press the MENU button to close the menu screen.
TIPS
• The menu will differ depending on the input mode.
• The menu screen will close automatically if no operation is
performed for about 15 seconds. (SCHEDULE screen will
close in about 4 minutes.)
n
Menu screen display
BRIGHT
CONTRAST
BLACK LEVEL
TINT
COLORS
SHARPNESS
COLOR ADJUSTMENT
ADVANCED
RESET
31
30
30
30
30
12
SCREEN
PICTURE
SETUP
MONITOR
MULTI/PIP
OTHERS
PICTURE
BACK:[RETURN]
1 920x1080
V: 60 Hz H: 67.5 kHz
D-SUB[RGB]
1
23
4
1 Name of the menu
2 Input mode
3 An item being selected (highlighted)
4 Screen resolution of input signal, and other data.
TIPS
• Items that cannot be selected appear in gray.
(e.g. Function not supported by the current input signal)