* All are compliant only with non-interlaced.
* Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.
* The frequency values for the Sun are reference values. A separate conversion adapter (commercially available) may be required for
connecting the monitor to the Sun.
Specifications
Dimensional Drawings
Note that the values shown are approximate values.
When mounting the monitor, read the
manual of the brackets or stand for their
mounting procedure. The screw holes for
mounting brackets (M10 x 4 holes) are
provided on the rear of the monitor.
Note that screw hole depth of the monitor
is 30 mm. Loose holding may cause the
product to fall, resulting in serious personal
injuries as well as damage to the product.
The screw and hole should come together
with over 20 mm length of thread. Use the
bracket which can endure at least 4 times
or more the weight of the monitor.
To Next Page
Loading...
