Sharp PN-G655RE - User Manual

Questions and Answers

L
ljonesAug 17, 2025
Why does my Sharp PN-G655RE have no picture or sound?
- M
  Mark ArmstrongAug 18, 2025
  If your Sharp Monitor isn't displaying a picture or sound, several things could be the cause. First, check if the power cord is disconnected. Second, ensure the main power switch is set to “ON”. Third, verify the monitor is not in standby mode (orange power LED). Fourth, make sure the correct input mode is selected. Finally, if external equipment is connected, ensure that equipment is operating correctly.
S
Susan SullivanAug 20, 2025
What to do if my Sharp Monitor has picture but no sound?
- D
  David MullinsAug 20, 2025
  If your Sharp Monitor displays a picture but has no sound, consider these possible causes: * Check if the sound is muted. * Make sure the volume isn't set to the minimum. * Verify the PC audio cable is connected properly. * Ensure all audio cables are correctly connected. * Confirm the audio signal is properly input to the audio input terminal corresponding to the selected video input terminal.
A
Antonio ReeseAug 22, 2025
How to fix a Sharp Monitor remote control that is not working?
- R
  Robert NunezAug 22, 2025
  If the remote control for your Sharp Monitor isn't working, try these solutions: * Ensure the batteries are inserted with the correct polarity (+, -). * Replace the batteries if they are exhausted. * Point the remote control directly at the monitor's remote control sensor. * Check if the menu display is hidden or if operation is disabled.
J
johnmillerAug 25, 2025
What does it mean when the power LED flashes red and “SERVICE CALL” appears on my Sharp Monitor?
- J
  Jennifer GarciaAug 26, 2025
  If the power LED on your Sharp Monitor flashes red and “SERVICE CALL” appears on the screen, it indicates a hardware problem. Turn off the monitor and request repair from your SHARP dealer.
D
Dennis EdwardsAug 27, 2025
Why is the sound reversed or only coming from one side on my Sharp Monitor?
- B
  Brent WalterAug 27, 2025
  If the sound from your Sharp Monitor's speakers is reversed or only coming from one side, check the following: * Ensure that the audio cables are connected properly. * If using external speakers, make sure their audio cables are correctly connected; the left and right cables may be reversed, or one cable might not be connected. * Verify the setting of BALANCE in the AUDIO menu.
S
sheri47Aug 30, 2025
Why is the video on my Sharp PN-G655RE unstable?
- G
  Gregory BanksAug 30, 2025
  Unstable video on your Sharp Monitor can be caused by an incompatible signal. If you're using the PC2 or PC3 input terminal, try the automatic screen adjustment.
L
Lisa ThomasSep 1, 2025
What to do if PC1 or AV1 does not appear properly on Sharp Monitor?
- A
  Aimee WilsonSep 1, 2025
  If PC1 or AV1 is not displaying correctly on your Sharp Monitor, verify that the setting of DVI SELECT is correct and that the input signal is compatible with the monitor. Also, try turning off the power to the connected equipment and then turning it back on again. If the monitors are connected in a daisy chain, turn off the power to all the monitors connected in a daisy chain and then turn the power on again.
D
Dakota AliSep 4, 2025
What to do if PC3 or AV2 does not appear properly on Sharp PN-G655RE Monitor?
- W
  williammartinSep 4, 2025
  If PC3 or AV2 is not displaying correctly on your Sharp Monitor, check if the setting of BNC SELECT is correct and ensure that the input signal is compatible with the monitor.
C
Carolyn PatelSep 6, 2025
Why does my Sharp PN-G655RE display “TEMPERATURE”?
- J
  Joshua Hanna MDSep 6, 2025
  When your Sharp Monitor displays “TEMPERATURE”, it means the internal temperature of the monitor has risen excessively. To prevent high-temperature-related problems, the brightness of the backlight decreases. Remove the cause of the excessive rise in temperature.
J
John FreemanSep 9, 2025
What to do if my Sharp Monitor enters standby mode due to temperature rise?
- K
  Kevin KingSep 9, 2025
  To return your Sharp Monitor to normal display after it enters standby mode due to a rise in temperature, turn the main power switch off and then back on again. Check whether the monitor is placed at a location where a quick rise in temperature is likely. Also, make sure that the vents on the monitor are not blocked and remove any dust that may have accumulated inside the monitor or around the vents.

Summary

Product Important Information

Fire and Electric Shock Precautions

Warnings about fire risk, electric shock, and proper installation near outlets.

Comprehensive Safety Precautions

Safe Operation and Handling Rules

Detailed rules for safe installation, operation, cleaning, and maintenance of the monitor.

Monitor Installation Guide

Mounting Precautions and Procedures

Safety and procedural guidelines for safely installing and mounting the monitor.

Peripheral Connection Guide

PC Input Connections

AV Input Connections

Power Cord Connection Procedure

Monitor Power Management

Main Power Switch Use

Explains how to turn the monitor on and off using the main power switch.

Remote Power Button Functions

Describes using the POWER button on the remote control for on/off and standby modes.

Core Monitor Operations

Input Source and Volume Adjustment

Display Information and Brightness Control

Color Modes and Menu Access

Screen Aspect Ratio Adjustment

On-Screen Display (OSD) Menu

Accessing and Navigating the Menu

Guide on how to access and navigate the monitor's on-screen display (OSD) menu.

Picture, Audio, and Screen Settings

Explains various menu items for SCREEN, PICTURE, and AUDIO settings.

Advanced Setup and Option Settings

Multi-Screen Display Modes

Scheduling and PC Display Adjustments

System Reset and Function Lock

Factory Reset and Operation Control

How to perform a factory reset and lock/unlock monitor operations.

PC Remote Control Operations

PC Connection Setup

Explains one-to-one and daisy chain connections using RS-232C for PC control.

RS-232 C Communication Protocol

Details communication conditions, command formats, and response codes for PC control.

Daisy Chain ID Number Management

Repeater Control for Multiple Monitors

RS-232 C Command Reference Table

Troubleshooting Common Issues

Display and Audio Problem Solutions

Solutions for problems like no picture/sound, reversed audio, or no sound with picture.

Remote Control and Video Signal Issues

Temperature Alerts and Resolution

Explains temperature-related warnings, automatic brightness reduction, and standby mode.

Technical Specifications Overview

Product Specification Summary

Sharp PN-G655RE Specifications

General

Screen Size	65 inches
Brightness	350 cd/m²
Contrast Ratio	4000:1
Aspect Ratio	16:9
VESA Mount	Yes (400 x 400 mm)
Touch Support	No
Viewing Angle	178°
Connectivity	LAN, RS-232C
Response Time	8 ms
Input Terminals	HDMI, DisplayPort, DVI-D, VGA
Output Terminals	HDMI (out), DisplayPort (out)
Built-in Speakers	Yes