Sharp PN-HW501 User Manual

14
E
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the power outlet.
1
For power outlet
3
For power outlet
3
2
[PN-HW861/PN-HW751/PN-HW651]
12
[PN-HW551/PN-HW431]
Main power
switch
AC input
terminal
Main power
switch
AC input
terminal
Power cord (Supplied) Power cord (Supplied)
12
[PN-HW501]
Main power
switch
AC input
terminal
Power cord (Supplied)
For power outlet
3
Binding Cables
The supplied cable clamps (afxing type) can be used to clamp the power cord and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a at surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.
Cable clamp
(affixing type)
Affixing point
Cable

Sharp PN-HW501 Specifications

General

Brand	Sharp
Model	PN-HW501
Category	Monitor
Language	English