Sharp PN-HW861 - Supplied Components; Specifications; Preparing the Remote Control Unit

ENGLISH
5
E
Supplied Components
Preparing the Remote Control Unit
1. Place your nger on the part marked with the ▲, and then pull the cover off.
2. See the instructions in the compartment and put in the supplied batteries (R03 (“AAA” size) x 2) with their plus (+)
and minus (-) sides oriented correctly.
3. Close the cover.
If any component should be missing, please contact your dealer.
Specications
Model PN-HW861 PN-HW751 PN-HW651
Power requirement AC 100 - 240 V, 3.7 A,
50/60 Hz
AC 100 - 240 V, 2.9 A,
50/60 Hz
AC 100 - 240 V, 2.3 A,
50/60 Hz
Operating temperature * 32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption 330 W 255 W 205 W
Dimensions inch (mm)
(excluding protrusions)
Approx. 75-7/8 (W) x
3 (D) x 43-1/4 (H)
(1928 x 76 x 1099)
Approx. 66-1/8 (W) x
2-9/16 (D) x 37-3/4 (H)
(1680 x 65.5 x 959)
Approx. 57-3/8 (W) x
3-1/4 (D) x 32-7/8 (H)
(1458 x 82 x 835)
Weight lbs. (kg) Approx. 141.1 (64) Approx. 121.3 (55) Approx. 57.3 (26)
Model PN-HW551 PN-HW501 PN-HW431
Power requirement AC 100 - 240 V, 1.7 A,
50/60 Hz
AC 100 - 240 V, 1.5 A,
50/60 Hz
AC 100 - 240 V, 1.3 A,
50/60 Hz
Operating temperature * 32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption 150 W 130 W 115 W
Dimensions inch (mm)
(excluding protrusions)
Approx. 48-3/4 (W) x
2-3/8 (D) x 28 (H)
(1239 x 60 x 711.5)
Approx. 44-1/4 (W) x
2-11/16 (D) x 25-7/16 (H)
(1124 x 68 x 646.5)
Approx. 38-1/8 (W) x
2-3/8 (D) x 22 (H)
(968 x 60 x 559)
Weight lbs. (kg) Approx. 35.3 (16) Approx. 28.7 (13) Approx. 19.8 (9)
* Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases,
please check the temperature condition specied by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for
product improvement without prior notice. The performance specication gures indicated are nominal values of production
units. There may be some deviations from these values in individual units.

Liquid Crystal Display Monitor: 1

Remote control unit: 1

Power cord

R03 battery (“AAA” size): 2

CD-ROM (Utility Disk for Windows): 1

Setup Manual (this manual): 1

Cable clamp: 2

Logo sticker: 1

USB ash drive cover: 1

USB ash drive cover xing screw: 1
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.