EasyManuals Logo

Sharp PN-LC652 Setup Manual

Sharp PN-LC652
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
ENGLISH
7
E
TIPS
Be sure to clamp the power cord (supplied) by using the supplied cable clamp. When clamping the power cord, take care not
to stress the terminal of the power cord. Do not bend the power cord excessively.
Cable clamp (Supplied)
Power cord (Supplied)
To use the touch panel with an HDMI / D-sub / DisplayPort connection, connect the supplied USB cable to the computer.
The touch panel and touch pen operate with the standard driver of each operating system. On the Mac, operation is only
possible in mouse mode.
The Information Display Downloader can also be downloaded from the following website.
https://business.sharpusa.com/product-downloads
When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs.
To install the software, see the manual for each.
Pen Software setup program and Touch Viewer setup program can be downloaded using Information Display Downloader.
Apple and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
DisplayPort is a registered trademark of Video Electronics Standards Association.
Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe in the United States and/or
other countries.
VESA is either registered trademark or trademark of Video Electronics Standards Association in the United States and/or
other countries.
All other brand and product names are trademarks or registered trademarks of their respective holders.

Other manuals for Sharp PN-LC652

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp PN-LC652 and is the answer not in the manual?

Sharp PN-LC652 Specifications

General IconGeneral
Pixel pitch0.372 x 0.372 mm
LED backlightYes
Response time8 ms
Display diagonal65 \
Surface hardness8
Display brightness450 cd/m²
Display technologyLCD
Native aspect ratio16:9
LED backlighting typeDirect-LED
Touchscreen technologyInfrared
Contrast ratio (typical)1200:1
Display number of colors1.07 billion colors
Display diagonal (metric)163.9 cm
Active display area (W x H)1428.5 x 803.5 mm
Number of simultaneous touchpoints20
DVI portNo
USB connector typeUSB Type-A, USB Type-B, USB Type-C
USB ports quantity6
HDMI ports quantity4
Ethernet LAN data rates10, 100, 1000 Mbit/s
HDMI input ports quantity3
HDMI output ports quantity1
USB 2.0 Type-B ports quantity2
PurposeEducation
Pen typePassive pen
Operating hours (hours/days)16/7
RMS rated power30 W
OrientationHorizontal
Screen shapeFlat
Mounting typeWall
Product colorBlack
Product designDigital signage flat panel
Bezel width (side)21.9 mm
Placement supportedIndoor
Bezel width (bottom)53.2 mm
Panel mounting interface600 x 400 mm
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2 W
Power consumption (typical)390 W
Internal memory8 GB
Processor familyARM Cortex
Processor architectureARM Cortex-A55
Processor manufacturerARM
Internal storage capacity16 GB
Operating system installedAndroid 11
Package depth225 mm
Package width1660 mm
Package height1010 mm
Package weight49000 g
CertificationCE; FCC; RCM; REACH; RoHS; UL/C-UL
Cables includedAC, USB
Weight and Dimensions IconWeight and Dimensions
Display depth85.9 mm
Display width1511.6 mm
Display height917.9 mm
Display weight38500 g

Related product manuals