Sharp PN-R426

13
E
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
2
For power
outlet
3
Power cord (Supplied)
Main power switch
1
AC input terminal
Binding Cables
The supplied cable clamps (afxing type) can be used to clamp the power code and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a at surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.
Cable clamp
(affixing type)
Affixing point
Cable