Sharp PN-R706 - Specifications

8
E
Model PN-R706 PN-R606
Power requirement AC 100 - 240 V, 2.6 A, 50/60 Hz AC 100 - 240 V, 2.2 A, 50/60 Hz
Operating temperature
*
32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption 230 W 190 W
Dimensions inch (mm)
(excluding protrusions)
Approx. 62-3/16 (W) x 2-9/16 (D) x
36-1/8 (H) (1579 x 65 x 918)
Approx. 53-1/8 (W) x 2-3/8 (D) x 30-1/2 (H)
(1349 x 60 x 775)
Weight lbs. (kg)
Approx. 99.3 (45) Approx. 72.8 (33)
Model PN-R556 PN-R496 PN-R426
Power requirement AC 100 - 240 V, 2.0 A,
50/60 Hz
AC 100 - 240 V, 1.8 A,
50/60 Hz
AC 100 - 240 V, 1.5 A,
50/60 Hz
Operating temperature
*
32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption 175 W 155 W 135 W
Dimensions inch (mm)
(excluding protrusions)
Approx. 48-7/16 (W) x
2-1/4 (D) x 27-5/8 (H)
(1231 x 57 x 702)
Approx. 43-1/8 (W) x
2-1/4 (D) x 24-5/8 (H)
(1095 x 57 x 626)
Approx. 37-3/8 (W) x
2-1/4 (D) x 21-3/8 (H)
(949 x 57 x 543.5)
Weight lbs. (kg)
Approx. 55.1 (25) Approx. 43 (19.5) Approx. 34.2 (15.5)
* When using the monitor laying at on a surface (when the monitor is tilted more than 20 degrees upward or downward from the perpendicular
in relation to a level surface), use the monitor at a temperature between 32°F (0°C) to 86°F (30°C).
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specied by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Specications