CONFIDENTIAL
PN-V601 Installation Guidelines <Rev1.4 > September.30, 2010
CONFIDENTIAL
35
Installation tool 5
Name (temporary) Use Image
Installation spacer
device
(UKOG1011MPZZ)
- Insert this spacer between the PN-V601 while
installing the neighboring PN-V601s so the units do not
touch.
And after installation is finished, remove this spacer
device.
Temporary stand
（UKOG1004MPZZ）
Temporary stand
-This stand is for fixing PN-V601 temporarily to check
operation and perform settings before installation.
2 pieces of this stand are necessary per one PN-V601.
Supply cable for 200
volts
(QACCJA104WJPZ)
Supply cable for 200 volts
-Supply cable for 100 (120V) volts is enclosed in
PN-V601 for Japan (US) model.
If PN-V601 is used with with 200 volt environment ,
power supply cable for 200 volts is necessary.
We will provide following service parts for installation (they are subject to fees)
* if you need above tools, please contact delivery agent or our sales reps.
To Next Page
Loading...
