13
Example: If you want to know the total amount of times the oven has been used, and the number of times each
programme has been used. In the following example, the total time was 8268 and memory 1 was 513.
COUNTER CHECK
Set the counters to "0" before using your new oven (see COUNTER CLEAR below) to keep a record of the oven use.
Step Procedure
1
Display
CHECK will flash on and off.
(Total times used)
Key Order
X 2
CHECK
2
(Times memory 1 was used)
After about 1 sec.
Note: 1. To cancel Counter Check mode, press the CHECK key .
Each counter can count the times up to 9999, and it will return to 0 if it is over 9999.
2.
To check the times of manual cooking, press the SELECT TIME key at Step 2 instead of the NUMBER key.
To check the times of EXPRESS DEFROST cooking, press the EXPRESS DEFROST key at
Step 2 instead of the NUMBER key.
Note: 1. To cancel Counter clear mode, press the CHECK key
.
2.
To clear the times of manual cooking, press the SELECT TIME key at Step 2 instead of the NUMBER key.
To clear the times of EXPRESS DEFROST cooking, press the EXPRESS DEFROST key
at Step 2 instead of the NUMBER key.
3. To clear total using times, skip Step 2.
To check memory 1 usage,
press the NUMBER key
.
Press the CHECK key twice.
Step Procedure
1
DisplayKey Order
X 2
Each number of times can be cleared.
Example: Suppose you want to clear the times of memory 1.
CHECK
CHECK will flash on and off.
(Total times used)
2
(Times memory 1 was used)
NO.
CHECK
After about 1 sec.
CHECK
3
Press the NUMBER key
.
CHECK
COUNTER CLEAR
Press the SET key.
Press the CHECK key twice.
SEEG R15AT O/M(E),P04-13 13.7.9, 8:57 AM13