Sharp R-15AT Original Instruction

18
SPECIFICATIONS
AC Line Voltage 230V, 50Hz, single phase
Distribution line fuse/circuit breaker 16A (time lag)
AC Power Required 1.55kW
Output Power 1000W(IEC 60705)
Microwave Frequency 2450MHz *(Group 2/Class B)
Sound level less than 70dB(A)
Outside Dimensions 520 mm(W) x 309 mm(H) x 424 mm(D)
Cavity Dimensions 351 mm(W) x 211 mm(H) x 372 mm(D)
Oven Capacity 28litres
Cooking Uniformity Rotary antenna system
Weight Approx. 18kg
* This Product fulfils the requirement of the European standard EN55011. In conformity with this standard, this
product is classified as group 2 class B equipment. Group 2 means that the equipment intentionally
generates radio-frequency energy in the form of electromagnetic radiation for heating treatment of food.
Class B equipment means that the equipment suitable to be used in domestic establishments.
(This product is designed for commercial application only and as such it falls outside the scope of Regulation
(EC) 1275/2008 implementing EU Directive 2005/32/EC on eco-design requirements for standby and off
mode electric power consumption. Sharp do not recommend the product for domestic application and will
not accept any liability for such use.)
SEEG R15AT O/M(E),P14-20 13.7.9, 8:57 AM18

Sharp R-15AT Specifications

General

Grill	No
Rotisserie	-
Control type	Buttons
Display type	LCD
Product type	Solo microwave
Certification	CE
Product color	Stainless steel
Microwave power	1000 W
Built-in display	Yes
Appliance placement	Countertop
Number of power levels	11
Current	16 A
Connected load	- W
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	424 mm
Width	520 mm
Height	309 mm
Weight	18000 g
Interior dimensions (W x D x H)	351 x 372 x 211 mm