Sharp R-22AT User Manual

A31845,SUK R22AT/24AT O/M
7
MEMORY PROGRAMME ENTRY
You can change memory programmes for 20 memory banks. One, two or three sequences can be programmed.
See cooking sequence chart on top of page 11 for time maximums.
Step
Action Display
1
2
Select set mode.
* Example : If you want to set 4 minutes at 60% as the 1st sequence and 2 minutes at 30% as the 2nd sequence
for 1 serving in the memory 1.
NUMBER
Press pad
1
within 2 sec.
X 2
4
5
6
7
8
9
10
11
Enter desired cooking time for 1st
sequence. (4 minutes)
Press POWER LEVEL pad.
Enter desired power level for 1st
sequence. (60%)
Press MANUAL/REPEAT pad.
Enter desired cooking time for 2nd
sequence. (2 minutes)
Press POWER LEVEL pad.
Enter desired power level for 2nd
sequence. (30%)
Press SET pad twice to complete
the setting.
NUMBER
1
NUMBER
POWER
%
1
NUMBER
POWER
%
1
NUMBER
2
NUMBER
2
NUMBER
POWER
%
2
NUMBER
POWER
%
2
0
4
X 1
X 2
6
0
X 1
X 2
2
3
X 2
3
Press MANUAL/REPEAT pad.
NUMBER
1
NUMBER
MEMORIZING TIME AND POWER LEVEL
Note: 1. If the cooking time is over the max. time, the display will show "EE9". See page 13.
2. If your programmed time is over max. time at Double Quantity, you cannot use Double
Quantity for the memory. You can cook only 1 serving.
3. It is not necessary to press POWER LEVEL pad for 100%.
4. At step 1, the audible signal will not sound when the SET pad is pressed once but an
audible signal will sound when the SET pad is pressed twice.
SET
MANUAL /
REPEAT
POWER LEVEL
POWER LEVEL
MANUAL /
REPEAT
SET
Select memory number.
1
Untitled-4 04.1.9, 8:17 PM7

Sharp R-22AT Specifications