E – 5
BEFORE OPERATING
Getting Started
Step Procedure Pad Order Display
1
Plug the oven into a power point.
Ensure the door is closed.
Flashing four eights.
2
Press the STOP/CLEAR pad so that
the oven beeps.
Only the dots will remain.
Clock Setting
* To enter the present time of day e.g. 11:34 (AM or PM).
Step Procedure Pad Order Display
1
Press the TIMER/CLOCK pad.
The dots (:) will flash on and off.
2
Enter the correct time of day by
pressing the numbers in sequence.
3
Press the TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45), will appear in the
display.
Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).
If you wish to know the time of day during the cooking mode, press the TIMER/CLOCK pad. As long as your
finger is pressing the TIMER/CLOCK pad, the time of day will be displayed.
Stop/Clear
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
R-25C1(S)_EN [01 EN].indd 5 3/2/2559 15:08:07
To Next Page
Loading...
Need help?
General
