20
Step
Procedure
3
The control panel is now locked, each time a pad is pressed, the display will show "LOCK".
Press the number 2 pad.
Press the INSTANT COOK/START
pad.
Pad Order
Display
The time of day will appear in the display.
2
If the oven is accidentally started with no food or liquid in the cavity, the life of the oven may be reduced.
To prevent accidents like this, your oven has a "Child Lock" feature that you can set when the oven is not in use.
* To set the Child Lock.
After step 1 for Auto Start.
Child Lock
* To unlock the control panel.
After step 2 for Child Lock.
Step
Procedure Pad Order Display
The time of day will appear in the
display. The oven is ready to use.
Press the STOP/CLEAR pad.
3
This feature is mainly for use by retail outlets, and also allows you to practice key operations.
* To demonstrate.
After step 1 for Auto Start.
Demonstration Mode
Step
Procedure Pad Order Display
Press the number 3 pad.
Cooking operations can now be demonstrated with no power in the oven.
Press the INSTANT COOK/START
pad.
Then DEMO, MICRO-, WAVE, OVEN
will appear repeatedly.
2
3
* Suppose you demonstrate Instant Cook.
Step
Procedure Pad Order Display
Press the INSTANT COOK/START
pad.
The cooking time will begin counting
down to zero at ten times the speed.
When the timer reaches zero,
END will appear in the display.
1
STOP
CLEAR
INSTANT COOK
START
INSTANT COOK
START
INSTANT COOK
START
SCA/SCNA R398K(S) O/M,P19- 05.9.21, 10:42 AM20
To Next Page
Loading...
Need help?
General
