Sharp R-654M - Convenient Functions; Multiple Sequence Cooking; Auto Minute Function

16
CONVENIENT FUNCTIONS
Website: http://www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
A sequence of 3 stages (maximum) can be programmed using combinations of MICROWAVE, GRILL or
DUAL GRILL.
1. MULTIPLE SEQUENCE COOKING:
Example:
To cook for: 5 minutes on 100P power (Stage 1)
16 minutes on 30P power (Stage 2)
x1 x6
2. To input the power level press
the MICROWAVE POWER
LEVEL key once.
STAGE 1
1. To input the time, press the
1 MIN key 5 times.
STAGE 2
3. To input the time press the 10 MIN
key once and press the 1 MIN key
6 times.
x1
x5
The oven will begin to cook for 5 minutes on 100P and then for 16 minutes on 30P.
x1
x4
5. Press the START/AUTO MINUTE
key once to start.
4. To input the power level press the
MICROWAVE POWER LEVEL key
four times.
NOTE:
If 100P is selected as the final power level, it is not necessary to input the power level.
KG•LBTURNSTIR GRILL MICRO COOK
Example:
To cook on 100P for 2 minutes, press the START/AUTO MINUTE key twice.
NOTES:
• The AUTO MINUTE function for direct start, can only be input within 3 minutes after cooking completion, closing
the door or pressing the STOP/CLEAR key.
• The cooking time may be extended to a maximum of 99 minutes.
AUTO MINUTE enables you:
• To cook on 100P microwave power in multiples of 1 minute.
• To extend cooking time in multiples of 1 minute.
2. AUTO MINUTE:
KG•LBTURNSTIR GRILL MICRO COOK
KG•LBTURNSTIR GRILL MICRO COOK
KG•LBTURNSTIR GRILL MICRO COOK
KG•LBTURNSTIR GRILL MICRO COOK
Example:
x2
KG•LBTURNSTIR GRILL MICRO COOK
R-654M O/M & C/B 05/04/2001 10:59 Page 16