8
ENERGY SAVE MODE
Your oven comes set for the energy save mode with ENGLISH language only.
If you do nothing for 2 minutes after a preceding operation, i.e. plugging in or at the end of cooking, the
power will go off automatically. To restore power on, open and then close the door.
If you set the language using the LANGUAGE button or set the clock, energy save mode
does not work.
To start energy save mode, follow the instructions below.
Example:
To start the energy save mode, (the current time is 23:35):
1. Make sure the
correct time
appears on the
display.
3. Adjust the display
to 0 by rotating the
TIME/WEIGHT
dial.
2. Press the CLOCK
SETTING button.
4. Press +1 min /
START button. The power
will be off and the display
will show nothing.
x1
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press
the STOP button twice.
To Next Page
Loading...
Need help?
General
