9
SETTING THE CLOCK
ENGLISH
“ENERGY SAVE MODE TO GO OUT OF ENERGY
SAVE MODE SET LANGUAGE” in 6 languages. If
this occurs during cooking, the programme will be
erased. The time of day will also be erased.
5. When you want to reset the time of day, follow the
above example again.
6. If you do not set the clock, press the STOP button
once. will appear on the display. When
the operation of the oven is finished, will
reappear on the display instead of the time of day.
7. If you set the clock, energy save mode does
not work.
x1
There are two setting modes: 12 hour clock and 24 hour clock.
Step 1
x1
1. To set the 12 hour clock, press the CLOCK SETTING button once as in
Step 1.
2. To set the 24 hour clock, press the CLOCK SETTING button twice as in
Step 2 .
Step 2
x2
Example:
To set the 24 hour clock to 23:35.
x2
x1
2. Set the hours. Rotate the
TIME/WEIGHT dial
clockwise until the correct
hour is displayed.
Check the display.
4. Set the minutes.
NOTES:
1. You can rotate the TIME/WEIGHT dial clockwise
or counterclockwise.
2. Press the STOP button if you make a mistake
during programming.
3. If the oven is in cooking mode and you wish to
know the time of day, touch the CLOCK SETTING
button. As long as your finger is touching the
button, the time of day will be displayed.
4. If the electrical power supply to your microwave
oven is interrupted, plug in the oven again, then
open and close the door. The display will show
Your oven has 5 power levels. To choose the power level, follow the advice given in the cookbook section.
900 WATT = 100 % output 270 WATT = 30 % output
630 WATT = 70 % output 90 WATT = 10 % output
450 WATT = 50 % output
• To select microwaving, rotate the COOKING MODE dial to the microwave setting.
• To set the power, touch the MICROWAVE POWER LEVEL button until the desired level is displayed.
• If the MICROWAVE POWER LEVEL button is touched once, will be displayed. If you miss your
desired level, continue touching the MICROWAVE POWER LEVEL button until you reach the level again.
• If the level is not selected, the level 900 W (100 %) is automatically set.