Sharp RD-1230 - TPR-1600 H Specification

2-5
2.4.3 TPR-1600H Specification.
TPR-1600H
Diameter of column 432mm
Distance from Column surface to Spindle center, max. 1580mm
Distance from Column surface to Spindle center, min. 440mm
Travel of Spindle head 1140mm
Distance from Base surface to Spindle end, max. 1600mm
Distance from Base surface to Spindle end, min. 380mm
Elevating height of Arm. 850mm
Effective area of Table.
700mm╳500mm╳400mm
The dimensions of the Base (L ╳ W ╳ H) 2450mm╳1020mm╳200mm
Taper hole Spindle. MT#5
Stroke of the Spindle. 370mm
R.P.M. of Spindle.（R.P.M.╳ step）
35 – 1890 12 steps
Feed of Spindle（REV.╳ step）
0.07 - 0.96 6 steps
Main motor. 5.625KW(7.5HP)
Elevating motor.
1.5KW(2HP)
Clamping motor.
0.75KW(1HP)
Coolant pump .
0.1KW(1/8HP)
Machine height from floor, max. 3170mm
Height from the Column top to floor 2660mm
Net weight (approx.) kgs 4600kg
Shipping Gross weight. (approx.) kgs 4900kg
Shipping dimensions(L╳W╳H) 2820mm╳1450mm╳2920mm
The max. processing capacity.
Steel
∅65
Drilling
Cast iron
∅70
Steel
∅50
Taping
Cast Iron
∅60