7-2
7.2.3 The w
ay to clean iron filings:
1. Power off.
2. Put on gloves.
3. Clean from upside down using a brush.
4. When the iron filings comes down to the base, please collect it and put it at the right
side of the operation position.
5. Find a dustpan and place it under the machine.
6. Sweep it to the dustpan using the brush.
7. Rub every part of the machine with rags, particularly the parts where is
contaminated with the cutting fluids.
8. Rub every metal part of the machine using a oil-dipped rags.
7.2.4 Lubrication
Before every day’s work, please proceed the following maintenance.
（For TPR-1230, TPR-1230H）
No. Part Oil type Volum
e
1. Oil filler points of the column CC68 Full
2. Oil filler points on top of the
gearbox.
CC68 Full
3. Oil filler points in the right
side of the gearbox.
CC68 Full
4. Oil filler points of the spindle. CC68 Full
（For TPR-1600H/ TPR-2000H）
No. Part Oil type Volume
1. Column oil filler CC68 Full
2. Top gearbox oil filler CC68 Full
3. Left gearbox oil filler CC68 Full
4. Spindle oil filler XM2 Full
5. Clamping devise oil filler CC68 Full
To Next Page
Loading...