Sharp RD-1230 - Gearbox Oil Change

7-4
7.2.6 Chang the oil inside the gearbox.
It calls for only one person to do it. Please power off and press down the emergent stop button
before carrying out the job.
（For TPR-1230, TPR-1230H）
A. Instruction to the relevant parts.
1. Oil filler points
2. Oil gauge
3. Drain outlet
B. The following is the tools to replace the oil.
Oil(CC68) 4.5 L
Container and spanner.
The steps:
1. Power off.
2. Press down the emergent stop button.
3. Place a container under the oil drain outlet.
4. Release the drain plug using a spanner.
5. After draining, tape the plug with a sheet of band and tighten it back to the drain outlet.
6. Release the oil filler plug.
7. Add oil to the upper limit of the oil gauge.
8. Tighten the oil filler plug.
（For TPR-1600H/ TPR-2000H）
A. Instruction to the relevant parts.
1.
Oil filler points
2.
Oil gauge
3.
Drain outlet
B. The following is the tools to replace the oil.
Oil (CC68)3L
Container and spanner.
The steps:
1. Power off.
2. Press down the emergent stop button.
3. Place a container under the oil drain outlet.
4. Release the drain plug using a spanner.
5. After draining, tape the plug with a sheet of band and tighten it back to the drain outlet.
6. Release the oil filler plug.
7. Add oil to the upper limit of the oil gauge.
8. Tighten the oil filler plug.