Sharp SA-201H - Specifications; Amplifier Section; Name of Parts

SA-201H(BK)
() FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT,
PLEASE REFER TO THE OPERATION MANUAL.
SPECIFICATIONS
GENERAL DESCRIPTION TUNER SECTION
Power source: (H Model) AC 220 V, 50/60 Hz Frequency range: MW: 526.5 — 1606.5 kHz
(E Model) AC 240 V, 50/60 Hz LW: 150 — 285 kHz
Power consumption: 170 W FM: 87.6-- 108 MHz
Semiconductors: 7\Cs Usable sensitivity: MW: 350uV/m
16 Transistors (with loop Antenna)
1 FET LW: 350uV/m
26 Diodes (with loop Antenna)
5 LEDs FM: 2uV (40 kHz deviation,
Dimensions: Width; 330 mm (13”) S/N = 26 dB)
Height; 106 mm (4-3/16") Harmonic distortion: MW, LW; 1.5%
Depth; 275 mm (10-7/8"’) FM Mono; 0.4%
Weight: 4.3 kg (9.5 Ibs) FM Stereo: 0.6%
Image rejection: 45 dB (at 98 MHz}
AMPLIFIER SECTION IF rejection: 75 dB (at 98 MHz)
Music power output: 2 x 40 W/4 ohms Stereo separation: 30 dB
0.8% total harmonic distortion
Continuous power output: 2 x 20 W/4 ohms Specifications for this model are subject to change |
0.8% total harmonic distortion prior notice.
Frequency response: 20 Hz ~ 30 kHz (+3 dB)
Input sensitivity and
input impedance: PHONO; 3.5 mV, 47 kohms
TAPE: 275 mV, 23 kohms
CD/AUX; 220 mV, 23 kohms
Phono overload: 150 mY (RMS, 1 kHz, 0.3% THD)
Tone control: Bass; +8 dB at 100 Hz
Treble; +8 dB at 10 kHz
NAME OF PARTS
1. Power Switch
2. FM Preset Buttons
3. FM Manual Button
4. FM Preset Tuning Holes
5. FM/MW/LW Signal Strength Indicators
6. FM Stereo Indicator
7. Tuning Control
8. Band Selector Switches
9. Headphones Socket
10. Bass Control
11. Treble Control
12. Balance Control
13. Function Selector Switches
14, Loudness Switch
15. Volume Control
16. External FM Antenna Terminals
17. External MW/LW Antenna Terminals
18. Phono Input Socket
19. Auxiliary Input Sockets
20. Tape Input/Output Socket
21. Speaker Terminals
22. AC Power Supply Cord