To Next PageTo Next Page
Need help?Do you have a question about the Sharp SG-315H and is the answer not in the manual?
Identifies and labels all external controls and indicators on the unit's front panel.
Details the various input and output connectors located on the rear of the unit.
Provides a step-by-step guide for safely disassembling the unit's cabinet.
Covers critical adjustments for tape deck torque and pinch roller pressure.
Details tape speed verification and flywheel thrust clearance adjustments.
Illustrates the correct method for routing the dial cord for the tuning mechanism.
Describes adjustments for bias oscillator and playback head azimuth.
Details the adjustment process for the Automatic Level Control (ALC) characteristics.
Provides the step-by-step procedure for aligning the tuner section of the receiver.
Explains how to adjust the FM band low and high end frequencies for accuracy.
Covers alignment steps for both FM Intermediate Frequency and Radio Frequency stages.
Describes the alignment process for achieving optimal FM stereo reception.
Explains how to adjust bias current for power transistors for balanced operation.
Instructions on how to set the unit for the correct local mains voltage.
Details the procedure to convert the unit for 60Hz operation.
Lists integrated circuits, transistors, diodes, and coils with their part numbers.
Details transformers, controls, and capacitors for replacement.
Lists resistors, miscellaneous items, and player components.
Details mechanical components and panel parts for the tape deck mechanism.
General
