Sharp SJ-BA09DTXLF-EU - Accessories; Ice Tray (in some Models); The Storage Box; The Freezer Box

EN - 11
3.4 Accessories
Visual and text descriptions in the
accessories section may vary according
to the model of your appliance.
3.4.1 Ice Tray (In some models)
• Fill the ice tray with water and place in
the freezer compartment.
• After the water has completely frozen,
you can twist the tray as shown below to
remove the ice cubes.
3.4.2 The Storage Box
You can adjust and use this department for
2 di󰀨erent functions.
Sliding cover
(The images are representative)
Your fridge is delivered to you with the
cover shown in the open position.
Declared energy consumption and volume
are dened according to the Chiller option
of the product.
To use for 0 °C department:
If you want to use this compartment as a
0 °C box, you must take the sliding cover
(indicated in the picture) from the closed
position to the open position.
To use for Crisper department:
If you want to use this compartment as a
Crisper, you must take the sliding cover
(indicated in the picture) from the open
position to the closed position.
While this department is used as a 0
°C department, keeping food in the
Chiller, compartment instead of the freezer
or refrigerator compartments, allows food to
retain freshness and avour for longer,
while preserving its fresh appearance.
When the Chiller tray becomes dirty,
remove it and wash with water. Water
freezes at 0°C, but food containing salt or
sugar freezes at temperatures lower than
this. The Chiller compartment can be used
for storing foods such as raw sh, lightly
pickled food, rice, and so on.
Pull the chiller shelf out towards you.
The cover will open automatically.
Do not put food you want to freeze or ice
trays (to make ice) in this compartment.
3.4.3 The Freezer Box
The freezer box allows food to be accessed
more easily.
(The images are representative)
Freezer boxes
or
Freezer boxes
Freezer upper cover
(The images are representative)
Removing the freezer box:
• Pull the box out as far as possible