Need help?Do you have a question about the Sharp SX-8000H and is the answer not in the manual?
General| Type | Integrated Stereo Amplifier |
|---|---|
| Frequency Response | 5Hz to 100kHz |
| Total Harmonic Distortion | 0.008% |
| Inputs | phono, aux, tuner, tape |
| Outputs | tape |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker load impedance | 4Ω to 16Ω |
Instructions on how to furnish information for prompt and correct order fulfillment.
Procedure to switch the unit from 230V to 115V power supply operation.
To Next Page
