CHECKING FUNCTION OPERATION (2) (VIDEO & AUDIO) CONTINUED
NO
14
15
16
ADJUSTMENT POINT
TREBLE
SUPER BASS
VOLUME Headphone
ADJUSTMENT CONDITION / PROCEDURE
(1) Receive "E-5ch Monoscope Pattern" signal.
(2) Press to Menu mode, then select Sound Mode and set
to select TREBLE.
(3) Press Volume Up/Down key to check whether the
TREBLE effect is OK or not.
(1) Receive "E-5ch Monoscope Pattern" signal.
(2) Press to Menu mode, then select Sound Mode and set
to select SUPER BASS.
(3) Press Volume Up/Down key to check whether the
SUPER BASS effect is OK or not.
(1) Receive "E-5ch Monoscope Pattern" signal.
(2) connect Headphone.
(3) Press to Menu mode, then select Feature Mode and set
to select HEADPHONE.
(4) Press Volume Up/Down key to check whether the
VOLUME effect is OK or not.
WAVEFORM OR OTHERS
CHECKING FUNCTION OPERATION (WIDE MODE)
NO
1
2
3
ADJUSTMENT POINT
WIDE MODE
V-SIZE
in wide mode
V-SCROLL
in wide mode
ADJUSTMENT CONDITION / PROCEDURE
(1) Receive "Monoscope Pattern" signal.
(2) Press WIDE key to check change WIDE mode
PANORAMA/FULL/NORMAL/ZOOM14:9/CINEMA
(1) Receive "Monoscope Pattern" signal.
(2) Select PANORAMA, ZOOM14:9, and CINEMA mode.
(3) Select V-SIZE, Press Volume Up/Down key to check
whether the V-SIZE effect is OK or not.
(1) Receive "Monoscope Pattern" signal.
(2) Select PANORAMA, ZOOM14:9, and CINEMA mode.
(3) Select V-SCROLL, Press Volume Up/Down key to check
whether the V-SCROLL effect is OK or not.
WAVEFORM OR OTHERS
CHECKING FUNCTION OPERATION (TEXT MODE)
NO
1
2
ADJUSTMENT POINT
TEXT
TEXT key
ADJUSTMENT CONDITION / PROCEDURE
(1) Receive E-10ch signal.
(2) Press TEXT key to check change TEXT mode
TELETEXT mode / MIXED mode / TEXT off.
(1) Receive E-10ch signal.
(2) Press HALF PAGE, HOLD, REVEAL, CLOCK, CANCEL,
LIST, INDEX, and RESET key to check whether each
effect is OK or not.
WAVEFORM OR OTHERS
CHECKING FUNCTION OPERATION (AV MODE)
NO
1
ADJUSTMENT POINT
AV MODE key
ADJUSTMENT CONDITION / PROCEDURE
(1) Receive "Monoscope Pattern" signal.
(2) Press AV MODE key to check change AV MODE mode
STANDERD/MOVIE/MUSIC/NEWS
WAVEFORM OR OTHERS
CHECKING FUNCTION OPERATION (Twin Screen,PinP)
NO
1
2
3
4
5
ADJUSTMENT POINT
Twin Screen
(ON-OFF)
(Picture quality)
P in P
(ON-OFF)
(SIZE)
(MOVE)
P out P
(ON-OFF)
(MOVE)
FREEZE
CH-SCAN
ADJUSTMENT CONDITION / PROCEDURE
(1) Press "Twin Screen" key.
(2) Recive "E-5ch Monoscope Pattern" signal at SUB ch.
(3) Check the picture quality.
(4) Receive "E-12ch Colour bar" signal at SUB ch.
(5) Check the colour level.
(1) Press "P in P" key.
(2) Check the picture quality of SUB picture.
(3) Press "P in P" key.
(4) Check the SIZE of SUB picture.
(5) Press "MOVE" key.
(6) Check the position of SUB picture.
(1) Select NORMAL in Wide mode.
(2) Press to "P in P" key.
(3) Check the picture quality of SUB picture.
(4) Press "MOVE" key.
(5) Check the position of SUB picture.
(1) Receive "LIVE picture" signal.
(2) Press "P in P" key.
(3) Check the LIVE and FREEZE pictures.
(1) Press "CH-SCAN" key.
(2) Check the multi pictures.
WAVEFORM OR OTHERS
To Next Page
Loading...
