Sharp TU-GA1U-S - Preparation (Continued); Removing Speakers

15
TU-GA1U-S
TU-GAD
10. Remove the PC card PWB.
10-1. Remove the three lock screws from the PC card PWB angle.
10-2. Remove the four lock screws from the PC card PWB.
11. Remove the cooling fan (small) and front terminal PWB.
11-1. Detach the cooling fan (small).
11-2. Remove the four lock screws from the front shield.
11-3. Remove the one lock screw from the front terminal PWB.
12. Remove the cooling fan (large), main PWB and CPU PWB.
12-1. Detach the cooling fan (large).
12-2. Remove the four lock screws from the main PWB.
12-3. Remove the two lock screws from the CPU PWB.
12-4. Remove the lock screw from the main PWB angle.
10-2
10-1
PC CARD PWB
PC CARD PWB Angle
Cooling Fan (small)
Front PWB
Front Shield
11-1
11-2
11-3
12-3
12-2
12-4
12-1
MAIN PWB
CPU PWB
MAIN PWB Angle
Cooling Fan (large)
MAIN PWB Shield