Sharp TU-GA1U-S - Basic Adjustment Settings (Continued); Color Management System (CMS)

37
TU-GA1U-S
TU-GAD
2 When the formatting is over, the following window appears. Click [OK].
3 Click [Exit] to finish the formatting.
Note : When you are done, take out the SD card once to make sure it is finished, and then insert it again.
4 Copy the binary image file KA1UAxxx.SDC (named tentatively) for version upgrade to the root directory
(folder) of the SD card drive.
Note : In the SD card drive, do not put other folders or unrelated files, or more than one binary image files
for version upgrade.
5 Now the SD card for version upgrade is ready.