EasyManua.ls Logo

Sharp VC-A410U

Sharp VC-A410U
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Dimensions: 257 182 mm
FLE (M) Sdn. Bhd.VC-A420U (25-29)
The Simple Recording Timer (SRT) enables you to set the recording stop time. The SRT can be set on the TV
screen by using the remote control.
The SRT cannot be set if the clock has not been set. Make sure the clock is set before setting the SRT.
Turn on the TV and select the video channel. (See Setting the 3 4 Output Channel Selector.)
Insert a cassette with the erasure protection tab opening covered. Power will turn on automatically (POWER
LED indicator will light up).
Press TV/VCR to select VCR (VCR LED indicator will light up).
Only for Hi-Fi models
If necessary, set SAP on the SET UPselection screen. (See Mode Selection.)
SIMPLE RECORDING TIMER
Simple Recording Timer
Example: Recording a TV program in the SP mode. The program is on Channel 2, ending at 9:50 AM. The
present time is 8:43 AM.
! Select the desired channel with the numbered buttons or
CH /ƒ.
Ex.: Channel
02
@ Set the recording speed (SP or EP) with TAPE SPEED on
the remote control.
Ex.: SP
# Press REC to enter the recording mode (REC LED
indicator will light up).
Then, press REC again to enter the simple recording
timer mode (TIMER LED indicator will light up). The
recording stop time is displayed.
Ex.: 8:50 AM
$ Each press of REC increases the stop time by 10
minutes.
Ex.: 9:50 AM
The recording stop time will flash for a few seconds before the
stop time is fixed.
% When the stop time comes, recording is finished and the power turns off.
02
Recording Speed
SP
SP STOP 8:50AM
02
The Simple Recording Timer has priority over other
recordings.
Ordinary timer programs will not be recorded when portions of
the time setting of the simple recording timer and of the time
setting of the ordinary timer recording overlap.
Changing the Contents of the Simple Recording Timer
! Press REC. The stop time flashes on the TV screen.
@ Change the stop time as desired using REC.
Cancelling the Simple Recording Timer
! Press STOP.
Example:
9:00 10:00
Ordinary timer recording
(9:30 AM to 10:30 AM)
Simple Recording Timer
(9:00 AM to 10:00 AM)
NOT
recorded
Record-
ed
Recorded
11:00 12:00
02
SP STOP 9:50AM

Table of Contents

Other manuals for Sharp VC-A410U

Related product manuals