10
Dimensions: 257 ⳯ 182 mm
VC-A560U (06-10)
Setting the 3 ↔ 4 Output Channel
The 3 ↔ 4 Output Channel lets you change the VCR OUTPUT to standard TV broadcasting signals. Both your
TV and VCR must be set to the same channel (i.e TV on channel 3 and VCR OUTPUT channel on 3 too).
! Press POWER to turn the power off.
@ Press TV/VCR and if
# To change Output Channel from 3 to 4 (or 4 to 3). Press TV/VCR for 2 seconds until POWER, TIMER, VCR
and REC LED indicator (or POWER, TIMER and VCR LED indicator) lights up flashing. (As above)
$ Release TV/VCR, the Output Channel is set.
• VCR Output Channel is automatically set during EZ Set Up.
1. If Channel 3 (or 4) is an active broadcast channel in your area, the Channel 4 (or 3) will be set.
2. If both channel are the active channel or none active channel, the VCR Output Channel will be set to Channel 3.
• Cancelled the EZ Set Up by pressing POWER during EZ Set Up before setting the Output Channel.
Connecting the VCR
POWER, TIMER and VCR LED
indicator lights up flashing.
The VCR Output Channel is 3.
POWER, TIMER, VCR and REC
LED indicator lights up flashing.
The VCR Output Channel is 4.
To Next Page
Loading...
