Sharp ViewCam VL-NZ50U - Setting the Date and Time

Preparation
13
Preparation
Setting the Date and
Time
Example: Setting the date to June 2, 2003
(JUN. 2. 2003) and the time to 10:30 am
(10:30 AM).
Note:
• Before performing the steps below, make sure
that the lithium battery has been installed (see
page 11).
1 Hold down the Lock button
and set the Power switch to
CAMERA.
2 Press the MENU button until the menu
screen appears.
3 Press the SET button.
4 Press l or m to select “JUN” (month),
then press the SET button.
5 Press l or m to select “2” (day), then
press the SET button.
6 Press l or m to select “2003” (year),
then press the SET button.
7 Press l or m to select “10 AM” (hour),
then press the SET button.
8 Press l or m to select “30” (minute),
then press the SET button.
• The internal clock now starts operating.
9 Press the MENU button to turn off the
menu screen.
Note:
• If the date and time have been set, the SETTING
1 screen (T) appears in step 2. Select
“SETTING” in the CLOCK SET screen (P) using
the Operation button and SET button.
JUN.
12 00AM
:
1 2002.
SETT ING
JUN.
12 00AM
:
2 2002.
SETT ING
JUN.
12 00AM
:
2 2003.
SETT ING
JUN.
10 00AM
:
2 2003.
SETT ING
JUN.
10 30AM
:
2 2003.
SETT ING
CLOCK SET
DISPLAY
SETT ING
12H 24H/
RETURN
JAN. 1 20
12 00AM:
02.
Lock button
Operation button
SET button
Power switch
MENU button
VL-NZ50U-007-015 02.2.12, 5:19 PM13