Sharp ViewCam VL-NZ50U - Setting the Digital Zoom

24
Useful Features
Setting the Digital
Zoom
You can select three different zoom ranges: 1–
10K (optical zoom), 10–40K (digital zoom) or
10–300K (digital zoom). The digital zoom
allows you to record powerful close-up pictures
with the same operation as normal zooming.
Notes:
• The digital zoom is in addition to the optical
zoom giving a combined maximum zoom range
of 1–300K.
• As the image is enlarged digitally, the picture
quality decreases when higher digital zoom
settings are used.
1 In CAMERA mode, press the MENU
button until the menu screen appears.
2 Press l or m on the operation button
to select Y, then press the SET button.
3 Press l or m to select “DGTL ZOOM”,
then press the SET button.
4 Press l or m to select “40” or “300”,
then press the SET button.
5 Press the MENU button to turn off the
menu screen.
OF F
40
300
DGTL ZOOM
TAPE
DIS
SPEED
16 9:
AUD I O MODE
RETURN
SETT I NG 2
04
DGTL ZOOM
WT 25DZOOM -
The “D” digital zoom indicator is displayed
during digital zooming.
To use optical zoom only
Select “OFF” in step 4 above.
Digital zoom indicator
VL-NZ50U-022-026 02.2.12, 5:21 PM24