VL-E610S/VL-E610H
VL-E660S/VL-E96E
VL-E98E
3-8
8. Disassembly of the LCD panel
Lugs
(4)
Disengage the claw, and remove the LCD
panel.
(2)
(3)
Lugs
1. Disengage two claws, and
remove the lamp unit (1)
from the LCD holder (2).
2. Remove the sheets from
the LCD holder (2).
3. Pull the LCD holding sheet
(3).
4. Disengage the claw (B) ,
and slide the LCD panel
(4) in the (C) direction to
remove the LCD holder (2).
Note:
When handling the prism
sheet, diffusion sheet, light
guide plate, and reflection
sheet, do not touch any parts
other than lugs and sides.
Put the light guide plate and
reflection sheet between re-
flectors of lamp. Therefore,
install them together with the
lamp ass'y.
(2)
Reflection sheet
Prism sheet
Diffusion sheet
Light guide plate
(C)
Claw (A)
Claw (A)
(1)
Claw (B)
Reflection Polarizing sheet
(1)
To Next Page
Loading...
