1
VL-E780U
VL-E785U
VL-E785T
In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.
Page
2. SPECIFICATIONS .............................................................................................................................. 2
4. DISASSEMBLY OF THE SET ............................................................................................................. 3
5. MECHANISM ADJUSTMENT ............................................................................................................. 4
6. ADJUSTMENT OF VCR...................................................................................................................... 4
8. SCHEMATIC DIAGRAMS .................................................................................................................. 8
11.REPLACEMENT PARTS LIST ......................................................................................................... 29
12.PACKING OF THE SET ................................................................................................................... 35
SY8A8VL-E780U
CONTENTS
MODELS
SERVICE MANUAL
LIQUID CRYSTAL CAMCORDER 8 NTSC
VL-E780U
VL-E785U
VL-E785T
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
SHARP CORPORATION
In this Service Manual, only the differences from VL-E760U/765U are described.
Therefore, for the parts which are not described in this Service Manual, refer
to the Service Manual for VL-E760U/765U (S38N2VL-E760U).
8
8
MODELS VL-E780U/E785U/E785TLIQUID CRYSTAL CAMCORDER
NTSC
SERVICE MANUAL
VL-E780U
VL-E785U
VL-E785T
To Next Page
Need help?
General
