XG-P25X
13
2. Removing the Intake cover and lamp unit.
2-1. Detach the intake cover.
2-2. Loosen the screw and slide the lamp cover out of position.
2-3. Remove the three screws and lift the lamp unit out of position.
3. Removing the rear body.
3-1. Remove the six screws off the terminal board at the back.
3-2. Remove the six screws and detach the rear body.
2-1
2-3
3-2
3-2
2-2
3-1
Lamp Cover
Rear Body
Lamp Unit
Intake Cover
To Next Page
Loading...
