– 13 –
XL-3000/3000C
The time display always indicates "0:00".
Press the following buttons in this state to obtain the operations specified below.
"POWER" ................ Test mode and power turned off to shift to the ordinary standby mode.
"FF/FWD" ................The pickup slides toward the outer periphery while this button is pressed.
"REW/REV" .............The pickup slides toward the inner periphery while this button is pressed. If PICKUP IN is on, input is
invalid.
"PLAY".....................Shift to step 5
"STOP" ....................Return to step 1
"FUNCTION" ...........Shift to step 5
*If the focus is not received, the process returns to step 1.
4. Step 4 Mode
The CLV servo ON command (8600) is transmitted to wait for the following buttons to be pressed. (The disc is rotated for CLV
lock.)
Press the following buttons in this state to obtain the operations specified below.
"POWER" .................Test mode and power turned off to shift to the ordinary standby mode.
"FF/FWD" .................The pickup slides toward the outer periphery while this button is pressed.
"REW/REV"..............The pickup slides toward the inner periphery while this button is pressed. If PICKUP IN is on, input is
invalid.
"PLAY" .....................Invalid
"STOP".....................Return to step 1
"FUNCTION" ...........Shift to step 6
"MEMORY"..............Shift to step 7
*If the is not received, the process returns to step 1.
Other cautions
• TOC IL is not available for this test mode.
5. Step 5 Mode
When the CD initialization operation flow is completed, the mute is turned off, and playback is started. Even if playback reaches
the outermost periphery of disc, the operation does not stop. The LCD display indicates the playback passage time as in case
of ordinary CD playback.
To Next Page
Loading...
Need help?
General
