SPECIFICATIONS
As a part of our policy of continuous improve-
ment, SHARP reserves the right to make de-
sign and specification changes for product
improvement without prior notice. The perfor-
mance specification figures indicated are nom-
inal values of production units. There may be
some deviations from these values in individual
units.
■ Main unit
● General
Power source: AC 230 V, 50 Hz
Power
consumption:
Stand-by; 0.6 W
Power on; 24 W
Dimensions: Width; 160 mm (6-5/16")
Height; 241 mm (9-1/2")
Depth; 249 mm (9-13/16")
Weight: 2.6 kg (5.7 lbs.)
● Amplifier section
Output power: RMS; 10 W (5 W + 5 W)
(10 % T.H.D.)
Output terminals: Speakers; 4 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
● Tuner section
Frequency range: FM; 87.5-108 MHz
AM; 522-1,620 kHz
● Compact disc player section
Type: Compact disc player
Signal readout: Non-contact, 3-beam semi-
conductor laser pickup
D/A converter: 1-bit D/A converter
Filter: 8-times oversampling digital
filter
Frequency
response: 20 - 20,000 Hz
Wow and flutter: Unmeasurable
(less than 0.001% W. peak)
● Cassette deck section
Frequency
response:
50 - 14,000 Hz (Normal
tape)
Signal/noise ratio: 50 dB
Wow and flutter: 0.25 % (WRMS)
■ Speaker
Type: Full range speaker system
Speakers: 10 cm (4") full-range
speaker
Rated input power: 5 W
Maximum input
power:
10 W
Impedance: 4 ohms
Dimensions: Width; 145 mm (5-3/4")
Height; 240 mm (9-1/2")
Depth; 191 mm (7-1/2")
Weight: 1.4 kg (3.1 lbs.)/each
XL-530E(SUK) TINSE0017SJZZ
17
To Next Page
Loading...
