ACCESSORIES
Note:
Parts and equipment mentioned in this operation
manual other than those detailed above are not
included.
PRECAUTIONS
■ General
● Please ensure that the equipment is positioned in
a well ventilated area and ensure that there is at
least 10 cm (4") of free space along the sides, top
and back of the equipment.
● Do not use oil, solvents, petrol, paint thinners or
insecticides on the unit.
● Do not expose the unit to moisture, to tempera-
tures higher than 60˚C (140˚F) or to extreme low
temperatures.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and elec-
tronic/electrical equipment (home computers, fac-
similes, etc.) which generates electrical noise.
● Hold the AC power plug by the head when remov-
ing it from the AC socket, as pulling the lead can
damage internal wires.
● When cleaning the heads, pinch roller, etc, re-
move the AC power plug from the wall socket as
the unit contains high voltages.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
● Use the unit on a firm, level surface free from vi-
bration, and do not place anything on the top of
the unit.
● If an electrical storm is taking place near you, it
is suggested that you disconnect the AC power
lead from the AC socket for safety.
Warning:
The voltage used must be the same as that specified
on this unit. Using this product with a higher voltage
than that which is specified is dangerous and may
result in a fire or other type of accident causing dam-
age. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
■ Volume control
The sound level at a given volume setting depends
on a combination of speaker efficiency, location and
various other factors.
It is advisable to avoid exposure to high volume lev-
els, which occur whilst turning the unit on with the
volume control setting up high, or whilst continually
listening at high volumes.
■ Condensation
Sudden temperature changes, storage or operation
in an extremely humid environment may cause con-
densation inside the cabinet (CD pickup, tape heads,
etc.) or on the transmitter LED on the remote control.
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc (or
cassette) in the unit until normal playback is possible
(about 1 hour). Wipe off any condensation on the
transmitter LED with a soft cloth before operating the
unit.
Warning:
CD players use a laser pickup which can damage
the eyes if viewed directly. Do not look at the pickup,
and do not touch the pickup directly.
FM/AM loop aerial
× 1
Remote control × 1
AC power lead × 1
XL-530E(SUK) TINSE0017SJZZ
2
To Next Page
Loading...
Need help?
General
