E-22
ENGLISH
XL-E2H
6
9
1
2
3
4
5
7
8
Tape Recording
Recording on a cassette tape
Recording from CD or MP3/WMA disc
Before recording:
z When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
z SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
z The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
z For recording, use only normal tapes. Do not use metal or
CrO
2
tapes.
Erase - prevention tab of cassette tapes:
z When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassette have removable
tabs that prevent accidental recording or erasing.
z To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Tab for side B
Tab for side A
1 Press the ON/STAND-BY button to turn the power on.
2 Load a blank cassette.
3 Select "CD" function.
4 Load the disc to be recorded.
z Select the track number if required.
z For programmed recording, programme the material in ad-
vance (as described under "Programmed Play").
5 Press the RECORD button. The PLAY button is en-
gaged simultaneously and CD recording starts.
When you want to record music as you listen, press the
RECORD button. Recording starts automatically from the be-
ginning of the track.
6 Press the STOP/EJECT / button to stop recording.
When the end of the tape is reached, the CD player and deck
stop automatically.
To Next Page
Loading...
Need help?
General
