Sharp XL-HF102B User Manual

E-9
● If this unit or the source device is turned off before
Bluetooth connection is completed, pairing will not be
completed and the pairing information will not be mem-
orized. Repeat step 1 onward to start pairing again.
● To pair with other devices, repeat steps 1 - 5 for each
device. This unit can memorize up to a maximum of
99 devices. If subsequent device is paired, the oldest
device paired, will be deleted.
● Once a device is ousted or deleted from the pairing list,
the pairing information for the device is also deleted. To
listen to the sound from the device again, it needs to be
re-paired. Perform steps 1 - 5 to pair the device again.
● XL-HF102 supports Bluetooth prole AVRCP 1.4. If
your device supports the same prole (refere to device
manufacturer’s specication), XL-HF102 is able to con-
trol the volume of the device and display the song infor-
mation (title, album, artist).
Note:
Some music applications do not support this feature,
hence there will be no volume synchronization and no
song information will be displayed even if your Bluetooth
device supports such prole.
■ Listening to the sound
Check that:
● The source device Bluetooth functionality is ON.
● Pairing of this unit and the source device is completed.
● Unit is in connected mode.
1 Press the ON/STANDBY button to turn the power on.
2 Press the FUNCTION button (main unit) repeatedly to
select Bluetooth function.
3 Start the Bluetooth connection from the Bluetooth
stereo audio source device.
4 Press the BLUETOOTH / button.
Note:
If the source device has an extra bass function or
equalizer function, set them to off to avoid sound dis-
tortion.
Note:
Make the Bluetooth connection again if the source device is
not turned on, or its Bluetooth functionality is off or is in sleep
mode.
■ To disconnect the Bluetooth device
Perform any of the followings.
– Disconnect the Bluetooth connection on the audio source
device. Refer the operating manual supplied with the
device.
– Turn off the Bluetooth stereo audio source device.
– Turn off this unit.
Note:
The volume of this unit may not be controlled as intended
depending on the device.
■ Auto power on
During Bluetooth standby mode, the unit will automatically
power on when the Bluetooth connection is set up between
the main unit and your device.
Note:
This function is not applicable during Bluetooth standby
mode off.
Listening to Bluetooth enabled devices (continued)

Sharp XL-HF102B Specifications

General

Brand	Sharp
Model	XL-HF102B
Category	Stereo Receiver
Language	English