Sharp XL-HF102B User Manual

E-18
■ Open Accessory
Symptom Possible cause
● No sound is
produced.
● The device is not playing.
● The device is not properly
connected to the unit.
● The AC power cord of the
unit is not plugged in.
● Device will not
charge.
● The device is not making
full contact with the USB
terminal.
■ CD player
Symptom Possible cause
● Playback does not
start.
● Playback stops in
the middle or is not
performed properly.
● The disc is loaded upside
down.
● The disc does not satisfy
the standards.
● The disc is distorted or
scratched.
● Playback sounds are
skipped, or stopped in
the middle of a track.
● The unit is located near
excessive vibrations.
● Very dirty disc has been
used.
● Condensation has formed
inside the unit.
■ USB
Symptom Possible cause
● Device cannot be
detected.
● Is there any MP3/WMA le
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain
AAC le only?
● Playback does not
start.
● Is it a copyright protected
WMA le?
● Is it a false MP3 le?
● Wrong time display.
● Wrong le name
display.
● Is Variable Bitrate le
being played back?
● Is the File Name written
in Chinese or Japanese
characters?
■ Tuner
Symptom Possible cause
● The radio makes
unusual noises
continuously.
● The unit placed near a TV
or computer.
● The FM antenna is not
placed properly. Move the
antenna away from the AC
power cord if it is located
nearby.
■ Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter
on the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
■ If problem occurs
When this product is subject to strong external interfer-
ence (mechanical shock, excessive static electricity, ab-
normal supply voltage due to lightning, etc.) or if it is oper-
ated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the standby mode and turn the power
on again.
2 If the unit is not restored in the previous operation, unplug
and plug in the unit again, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
Troubleshooting chart (continued)

Sharp XL-HF102B Specifications

General

Brand	Sharp
Model	XL-HF102B
Category	Stereo Receiver
Language	English