Sharp YB-S1282AE - Page 11

EN-10
To programme time and power level into a memory
Example: If you want to set 4 minutes on 60% for the 1st sequence and 2 minutes on 30% for the 2nd
sequence for 1 serving in memory 1.
Step Procedure Key Order Display
1 Press the SET key twice within 2
seconds.
X 2
NO. will flash on and off.
2
Press the NUMBER key
.
3 Press the SELECT TIME key.
4 Enter desired cooking time for the
1st sequence. (4 minutes)
5 Press the SELECT POWER key.
6 Enter desired power level for the 1st
sequence. (60%)
7 Press the SELECT TIME key.
8 Enter desired cooking time for the
2nd sequence. (2 minutes)
9 Press the SELECT POWER key.
10 Enter desired power level for the
2nd sequence. (30%)
11 Press the SET key twice to complete
the setting.
X 2
P = Power
Note: 1. If the cooking time is over the max. time, the display will show “EE9”. See page EN-17.
2. If your programmed time is over max. time at Double Quantity, you cannot use Double Quantity for
the memory. You can cook only 1 serving.
3. It is not necessary to press the SELECT POWER key
for 100%.
4. At step 1 the audible signal will only sound on the second press of the SET key
.