Why is there flashing or arcing in my Sharp YC-QC254A Microwave Oven?
If you observe flashing or arcing from within the cavity of your Sharp Microwave Oven during cooking, this occurs when a metallic object is in close proximity to the oven cavity. This may roughen the surface of the cavity, but it would not otherwise damage the oven.
How to prevent Sharp YC-QC254A from arcing potatoes?
To prevent arcing when cooking potatoes in your Sharp Microwave Oven, ensure all “eyes” are removed from the potatoes and that they have been pierced. Place directly onto the baseplate in a heat resistant flan dish or similar.
Why is there a draught circulating around the door of my Sharp Microwave Oven?
When the Sharp Microwave Oven is working, air circulates within the cavity. The door does not form an airtight seal so air may escape from the door.
Why is there flashing or arcing inside my Sharp YC-QC254A Microwave Oven?
Arcing occurs when a metallic object is too close to the oven cavity during cooking. This may roughen the surface of the cavity, but it would not otherwise damage the oven.
Why does condensation form in my Sharp Microwave Oven?
The oven cavity is normally colder than the food being cooked, so steam produced during cooking will condense on the colder surface. The amount of steam depends on the water content of the food. Condensation trapped in the door glass should clear after a few hours.
General| Type | Microwave Oven |
|---|---|
| Capacity | 25 L |
| Power Output | 900 W |
| Cooking Modes | Microwave, Grill, Combination |
| Turntable Diameter | 315 mm |
Guidance for disposing of the product in the EU and outside for private and business users.
Key warnings and requirements regarding placement and ventilation for safe installation.
Guidelines for using grill rack, baking tray, and general cleaning notes.
Instructions on how to set the 12-hour or 24-hour clock time.
How to use the quick start feature for 100% power cooking.
How to use the built-in timer for cooking or other purposes.
Information on error codes and protection mechanisms like overheating and sensor malfunction.
To Next Page
