EN-14
SEQUENCE PROGRAMMING
This facility enables continued and uninterrupted operation of up to three different sequences.
Example: If you want to cook for 5 minutes on 70% followed by 3 minutes on 100%
Step Procedure Key Order Display
1 Press the SELECT TIME key.
2 Enter desired cooking time for the
1st sequence. (5 minutes)
3 Press the SELECT POWER key.
4 Enter desired power level for the 1st
sequence. (70%)
5 Press the SELECT TIME key.
6 Enter desired cooking time for the
2nd sequence. (3 minutes)
7 Press the START key.
P = Power
Note: If you want to programme 3 cooking sequences, repeat step 1-4 after step 6.
To Next Page
Loading...
