Sharp ZQ-2200

Contrast adjustment
Adjust the display contrast to make the display easier to read.
1. Press -1 1 FUNCTION 1 .
< FUNCTION >
I
MEMORY CHK
LCD CONT
DATA DEL
2. Select “2 LCD CONT”.
2
LCD CONT
A-DARK
V-LIGHT
3. Press a or m to darken or lighten the display as required.
The amount of contrast will change continuously when either m or
m is held.
4. After adjusting the contrast, press 1-j .
Turning the “beep” on and off
While “ &” is displayed, a “beep” will sound when a key is pressed. To
turn the “beep” on and off, press -1 ml. The “beep” will not
sound after “a” goes off. To turn the “beep” back on, repeat the process.
12