2. Switch to the next set of symbols.
ml
Each time
m[
is pressed, a new set of 5 symbols will appear in
sequence.
3. Enter
I‘?“.
Press
III
when a ‘I?” appears
next to the number one.
I
Note: When you press
mi
, the previous set of symbols reappears.
The initial symbol display is thus determined by your previous
choice. The 5 most recently used symbols and characters will
appear in the initial symbol display.
Nate:
To exit the symbol entry mode, press
-1
_
Entering the new-line character
‘2”
Enter the
“cl”
character to continue entry on the next line by
preS+SinCJ
F’J
, Then the cursor moves to the beginning of the next line.
Making corrections
Misspellings and incorrect entries can be corrected using
the cursor keys
as well as
-1
I]
and
I=
m
as follows:
Correcting misspellings
If you have entered “NEW
YARK”
for “NEW YORK”, for example, the entry
may be corrected as follows:
1.
Enter the incorrect spelling.
-1
NEW YARK
15
To Next Page
Loading...
