Sharp ZQ-6100M - Page 158

If your modem supports it, you may wish to set this to
ON.
LINE TYPE Set this according to whether the local phone line uses
tone or pulse dialing.
SPEAKER _ If turned on, you can hear the connection process as
your modem tries to make contact with the remote
system. The sound will automatically turn off after
connection is made.
WAKE UP If set to ON, the Organizer will be automatically turned
on and put into terminal mode when accessed by a
remote system. This function requires the appropriate
PC software and hardware.
This function cannot be used with the CE-130T/CE-131T
and data in the Organizer cannot be accessed if you
have set a password for the start-up display.
REDIAL The number of times the Organizer will attempt to redial
a number if unsuccessful before giving up. It can be set
to any value in the range 0-99.
Of these, only the line type is really important, all the other settings can
be left at their default values. If you have a pushbutton phone and
hear tones when you dial, then you have tone phone. !f you have a
rotary dial phone or hear a clicking sound when you dial, then you have
a pulse telephone. Refer to the modem operation manual for further
details.
Press when you are finished until you return to the terminal
main menu.
Dialing directory
The dialing directory contains all the configuration information needed
to connect and logon to the remote computer as well as the telephone
number of the connection point.
Select DIALING DIRECTORY from the terminal main menu.
162