11
English
FILLING WATER TANK
1. Turn OFF ( ) and unplug unit
from power source.
2. Place steamer on a flat, heat
resistant, level surface.
CAUTION: If unit has been in use, allow
to cool (5 minutes for minimum cooling
before removing Water Tank and
adding water).
3. Remove Water Tank by pulling
the Water Tank downwards away
from the unit, see Figure 1.
4. Remove rubber cap from top of
Water Tank and fill with distilled
water from a bottle or cup.
Replace rubber cap on top of the
Water Tank. Do not overfill Water
Tank.
NOTE: In order to extend the life of
your unit and keep it functioning
FIGURE 1
To Next Page
Loading...
