AFTER SALES SUPPORT
Email: service@prolinkasia.com
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 6
Supply Cord and Plug
Always unplug from mains supply when not in use. Do not abuse or damage
the power cord. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in order to
avoid a hazard.
Do not turn this appliance on or off by inserting or removing the plug from a
switched-on power outlet and always pull out the plug from the socket (pull
on the plug, not the cable)
Ensure hands are dry before handling the plug or the main unit.
Earth Safety
This appliance must be earthed. Only connect to a suitably earthed 220-240V
~ 50Hz supply socket.
Use and Environment
Operate the appliance on a flat and stable surface. The appliance must be
operated the right way up. Do not tip over. Do not use outdoors.
Do not unplug while the unit is operating.
Never place the appliance close to a radiant heat source.
Avoid contact with the moving parts. Keep hands, hair, and clothing, away
from the blade of the fan during operation to reduce the risk of injury to
person and/or damage to the unit.
Never insert or allow foreign objects to enter any ventilation or exhaust
opening, as this may cause an electric shock, fire or damage to the
appliance.
Never operate in areas where petrol, paint or other flammable liquids are
used or stored.
Never place the unit in wardrobes or other enclosed spaces as this may
cause fire hazards.
Do not use any means to accelerate the defrosting process or to clean,
other than those recommended by the manufacturer.
Do not run cord under carpeting and do not cover cord with throw rugs,
runners or the like. Arrange the cord away from traffic areas and where it will
not be tripped over. Avoid the use of an extension cord as this may overheat
and cause a risk of fire.
Pipe-work shall be protected from physical damage and shall not be installed
in an unventilated space if that space is smaller than 7m².
To Next Page
Loading...
