Shel lab SCO5A - Unit Specifications; Physical and Performance Specifications

55 | Page
UNIT SPECIFICATIONS
These incubators are 110 – 120 volt units. Please refer to the unit data plate for individual electrical
specifications.
Technical data specified applies to units with standard equipment at an ambient temperature of 25°C
and at nominal voltage. The temperatures specified are determined in accordance with factory
standard following DIN 12880 respecting the recommended wall clearances of 10% of the height,
width, and depth of the inner chamber. All indications are average values, typical for units produced
in the series. We reserve the right to alter technical specifications at all times.
WEIGHT
Model Shipping Unit
SCO5A 238 lb / 108 kg 200.0 lb / 91.0 kg
SCO10A 460 lb / 209 kg 400.0 lb / 182.0 kg
DIMENSIONS
Unit Body
In inches
Model Exterior W × D × H Interior W × D × H
SCO5A 27.5 x 28.5 x 37.8 20.5 x 19.8 x 21.5
SCO10A 27.5 x 28.5 x 75.6 20.5 x 19.8 x 21.5*
*Interior dimensions for the SCO10A are for each chamber
In millimeters
Model Exterior W × D × H Interior W × D × H
SCO5A 699 x 724 x 960 521 x 503 x 546
SCO10A 699 x 724 x 1921 521 x 503 x 546*
*Each Chamber
Access Port
Inner Diameter
1.3 in 33 mm